As part of a call for projects, Lynxter and APS Coatings identified two cases of masking parts to be printed. These masks will be used for plasma spraying of ceramic on parts for the Aerospace / Defense sector. For the first case, Lynxter made about 240 masks of 25 mm x 7 mm x 5 mm, which were simply plugged on the areas that needed to be spared.

Damien POMAREDE, Materials and Process Engineer at APS Coating Solutions, explains how silicone 3D printing can be an innovative masking solution to accelerate the validation of prototypes or produce small and medium series.

What was your problem, the challenge of the collaboration?

Damien POMAREDE :On this program, we had a relatively complex masking protocol, essentially manual. The execution of the latter requires a great deal of dexterity, attention, and self-control from the operators, with high risks of non-quality.

This operation mode could be suitable for the occasional production of a few prototypes, but it is not compatible with an increase in load and regular production. It was therefore necessary to improve our methods by streamlining this masking stage.

We had already used our SLA 3D printing capabilities to develop a masking solution. However, the specifications of the printed materials were not compatible with the production process.

The objectives of the collaboration with Lynxter were twofold.

First, we wanted to discover the concept of a multi-material 3D printer developed by Lynxter, and to evaluate the performance of printed silicones. This work is part of a more global reflection carried out by APS Coatings, aiming at identifying the levers for improving our industrial performance. The printing of masks and tools is one of them.

The second objective was to evaluate the integration of the 3D printer as a tool in our development and production processes and its influence on our organization and operating methods. The impacts in terms of design, manufacturing and testing time, suitability for the need and economic performance were carefully monitored.

Why choose elastomeric 3D printing for plasma spraying?

DP : Today we use a lot of silicone masks to spare parts coated by plasma projection. Our feedback is that some silicone formulations allow us to obtain masks that resist sandblasting and plasma spraying, with a decent durability. This solution also has the advantage of being easily fitted and removed, while guaranteeing a precise delineation and positioning of the masked areas on the parts.

Most of the time, the volumes and the recurrence of the markets totally justify the investment made in the development and manufacturing of this type of masks by more traditional methods with our subcontractors.

In cases where the traditional design of silicone masks, or other types of tooling, is not possible, we must resort to more manual masking methods, based on the application of adhesive masking tapes adapted to thermal spraying. In this case, the rapid and cost-effective development of a 3D printed silicone masking solution makes perfect sense.

What are the benefits of this new technology in your manufacturing process?

DP : The main gains we identify are of 4 types:

  • Reactivity in the design of masking solutions

In-house 3D printing allows us to shorten the time between the development of a design, its manufacture, and its testing in real conditions. Responding faster to our customers’ requests is a real advantage.

  • Accuracy of developed masking solutions

3D printing allows us to multiply the feedback loops and thus to respond in a more relevant way to the needs of the application. The use of adapted masks allows us to increase the quality of the finish of the treated parts.

  • Adaptation to smaller series

This technology allows us to significantly reduce the investment in manpower and material/service costs when developing our masks and tools. This enables us to consider specific developments, more efficient and effective than masking tapes, for less recurrent or smaller programs. Here again, our ability to excel regardless of the size of the series produced is a major challenge.

  • Securing the value chain

From mask design to manufacturing and, by extension, the production of customer parts, the integration of this technology allows us to consolidate our know-how and to control our costs and lead times much more precisely than the traditional model, based on subcontracting.

The challenge for APS Coatings is to reinforce the confidence of its customers by integrating a production capacity of masks adapted to each geometry.

Is this solution viable for integration as a masking solution in the surface treatment and coating sector?

DP : Our first observations are positive. The parts produced with the masks have all passed all our quality controls. The masks have withstood at least two spraying cycles without losing their function and have provided effective delineation of the coated areas.

In some cases, it will be necessary to fulfill some regulatory requirements to qualify the silicone formulation used. This work is underway at APS Coatings.

Finally, the productivity of the 3D printer seems to be compatible with our needs since it has been demonstrated that the number of masks required to produce a batch could be printed in about ten hours.

SUMMARY OF THE MASKING OPERATION WITH 3D PRINTING

TREATMENT USED Plasma spraying
TEMPERATURES Particles are projected at a temperature higher than 2000°C.
Plasma temperature : < 16 000°C
MASKING / UNMASKING TIME The masking time of the area under study is divided by 2
DEBURRING TIME The deburring time of the area under study is divided by 2
RESISTANCE DURING TREATMENT has the mask moved? No dislodging of the mask during the projection. A point of vigilance lies in the proper placement of the mask in its position. This point can be addressed by informing the operators and/or improving the design of the mask.
REACTION WITH THE TREATMENT Good resistance of the masks after 2 cycles. Slight abrasion of the mask in the exposed areas
RESIDUE OR OVERFLOWS ON THE PART No liquid or gas transfer observed on the masked part.

These tests validate to the following findings:

  • Simplified and optimized procedures for the preparation and application of specific masks.
  • Efficient delimitation of areas that are difficult to spare.
  • Easier deburring operations and improved finishing quality.
  • The masks are resistant to the spray flow and can be reused for at least two cycles.

This new solution empowers for rapid production of custom masks that can be reused and adapted to any shape of part to be treated.

Most importantly, silicone 3D printing brings a gain in efficiency during the masking stage and significantly reduces a complex operation.